NE15 Free-Fall Winch Range

Hydraulic free-fall piling winches — built for the job

Economical to buy, reliable to run, and compatible with D500 and D1000 drop hammer rigs. Designed and built by Noakes Engineering, Frome, Somerset.

UKCA Marked D500 & D1000 Compatible NE15-20LP — Pullmaster PL-5 Replacement Integrated Rope Guard Drum Lock Fitted Made in the UK

The NE15 range of hydraulic free-fall winches was developed by Noakes Engineering in direct response to the problems facing piling contractors: expensive OEM parts, long lead times, and the crippling cost of downtime. Every model in the range is designed to deliver the performance you need at a price that makes sense — with spare parts that are readily available and a manufacturer you can actually talk to.

Four models are available, covering 800 kg to 2,000 kg first-layer line pull. The NE15-20LP adds a direct Pullmaster PL-5 bolt pattern — a bolt-on replacement for the industry-standard PL-5 winch on D1000 rigs, with D500 adaptation in development.

New — NE15-20LP Same 2,000 kg performance as the NE15-20LH, machined to the Pullmaster PL-5 bolt pattern. Direct bolt-on replacement for PL-5 units on D1000 drop hammer rigs — no adapter plates, no modifications. View the NE15-20LP in our shop →

The problem

Tired of costly downtime?

Expensive OEM parts. Long lead times. A winch failure that takes your rig off-hire for weeks. If you run a D500 or D1000 drop hammer rig, you'll know the frustration of being at the mercy of a single supplier for parts that cost a premium and arrive when they arrive.

The solution

The NE15 range

We designed the NE15 range to solve exactly this. Competitive purchase price, equivalent performance, and spare parts available off the shelf. The NE15-20LP goes a step further — machined to the Pullmaster PL-5 bolt pattern so it replaces a failing PL-5 on a D1000 rig without any modification.

NE15-20LP — built at our Frome workshop

The NE15-20LP photographed at our workshop before installation. UKCA data plate fitted, fully tested and ready for the rig.

NE15-20LP hydraulic free-fall winch — front view showing data plate and motor

NE15-20LP front view — UKCA data plate and OMR-245 hydraulic motor.

NE15-20LP winch drum and frame — workshop view

Drum and frame detail — machined to the Pullmaster PL-5 bolt pattern.

NE15-20LP drum detail showing machined drum surface

Grease point — for lubrication.

NE15-20LP winch brake and side view

Brake and side frame.

NE15-20LP UKCA data plate closeup

UKCA data plate — serial number, pressure rating, and flow data.

The winch drum is machined in-house on our Haas Super Mini Mill 2 at Frome — the same machine documented in our engineering projects.

NE15-20LP winch drum component clamped on Haas Super Mini Mill 2 fixture plate at Noakes Engineering Frome

Winch drum component clamped on the Haas SMM2 at our Frome workshop — held on the custom fixture plate for precision referencing.

Completed NE15-20LP drum component still on fixture plate in Haas Super Mini Mill 2

The finished drum component still on the fixture plate — machined to tolerance before assembly and paint.

Installed on the rig

The NE15-20LP installed on a D1000 drop hammer rig. Hydraulic connections made up, winch seated on the PL-5 bolt pattern — no modifications required.

NE15-20LP installed on D1000 drop hammer rig — full view

NE15-20LP seated on the D1000 rig — Pullmaster PL-5 bolt pattern matches directly.

NE15-20LP mounting bracket and hydraulic connections on D1000 rig

Mounting bracket and hydraulic connection points.

NE15-20LP hydraulic motor and hose connections installed on piling rig

Hydraulic motor and hose connections — installation complete.

NE15-20LP drum with wire rope loaded on rig — drum lock bar visible

Drum with wire rope loaded — the red-capped drum lock bar is visible, securing the drum during maintenance.

NE15-20LP installed on D1000 rig — drum lock and data plate visible

Installed side view — drum lock engagement point visible alongside the UKCA data plate and hydraulic connections.

Why the NE15 range

Direct PL-5 replacement

The NE15-20LP bolts straight onto a D1000 rig in place of a Pullmaster PL-5 — no fabrication, no adapter plates.

Minimise downtime

Spare parts held in stock. No waiting weeks for OEM components while your rig sits idle.

UKCA marked

Full engineering documentation supplied. Every winch leaves our workshop with a UKCA data plate and serial number.

Built in the UK

Designed and assembled at our Frome, Somerset workshop. Talk to the engineers who built it.

Integrated rope guard

An integrated rope guard is fitted as standard — keeping the wire rope correctly spooled on the drum and protecting operators from contact with the moving rope.

Drum lock

A drum lock is included as standard, allowing the machine to be worked on safely during maintenance — an important safety feature for machines with automatic free-fall systems.

Model comparison

All four models share the same overall dimensions and mounting footprint — the key differences are line pull, line speed, and motor size. The NE15-20LP shares all specifications with the NE15-20LH but is machined to the Pullmaster PL-5 bolt pattern.

NE15-08LHNE15-10LHNE15-20LHNE15-20LPMost popular
Line pull (kg)
Layer 18001,0002,000
Layer 27009001,800
Layer 36308301,630
Layer 45807801,492
Line speed (m/min)
Layer 1605540
Layer 2695942
Layer 3746445
Layer 4807050
Hydraulics
Max flow (L/min)5460100
Max pressure (bar)148148160
General
Hydraulic motorOMR-125OMR-160OMR-245
Cable storage (m)404040
Weight excl. rope (kg)100100105
Bolt patternStandardStandardStandard
Replaces———
Rig compatibilityIn DevelopmentIn DevelopmentIn Development
BuyBuyBuy

Wire rope not included. All models supplied with UKCA data plate and engineering documentation. NE15-20LP compatible with D1000 only — D500 adaptation in development.

Available now Ready to order or need advice? Purchase direct from our shop or get in touch to discuss which model suits your rig. We're happy to advise on compatibility, installation, and lead times. Shop the NE15-20LP Or contact us to discuss your requirements · Made in the UK · UKCA marked

Get in Touch